Volkswagen Volkswagen CC 2009-2017 Body Panel & Frame Bolt Torque Specifications
Volkswagen Volkswagen CC 2009-2017

Volkswagen Volkswagen CC 2009-2017 Body & Frame Bolt Torque Specifications

Detailed torque specifications for body bolts on the 2009-2017 Volkswagen CC, including proper tightening sequences and values for various components.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Braking System

Components related to the vehicle's braking system, including calipers, brackets, and wheel attachments.

1

Brake Caliper Bolts

M12 x 1.5
Torque Value
89 ft-lbs (120 N·m)
Important Notes
These bolts secure the brake caliper to the steering knuckle or axle carrier. Proper torque prevents brake drag or failure.
2

Brake Caliper Mounting Bracket Bolts

M12 x 1.5
Torque Value
89 ft-lbs (120 N·m)
Important Notes
These bolts hold the caliper bracket to the vehicle's suspension or axle assembly. Correct torque prevents vibration or misalignment.
3

Wheel Lug Nuts

M12 x 1.5
Torque Value
89 ft-lbs (120 N·m)
Important Notes
Wheel lug nuts secure the wheels to the hub. Proper torque prevents loosening, which could lead to wheel separation.

Suspension System

Components related to the vehicle's suspension, including struts, control arms, and ball joints.

1

Strut/Shock Absorber Mounting Bolts

M10 x 1.25
Torque Value
74 ft-lbs (100 N·m)
Important Notes
These bolts connect the strut or shock absorber to the vehicle's body and suspension components. Proper torque ensures stability and alignment.
2

Control Arm Bolts

M10 x 1.25
Torque Value
74 ft-lbs (100 N·m)
Important Notes
These bolts secure the control arms to the chassis and suspension components. Correct torque ensures proper suspension geometry.
3

Ball Joint Nut

M8 x 1.25
Torque Value
52 ft-lbs (70 N·m)
Important Notes
The ball joint nut connects the steering knuckle to the control arm. Proper torque ensures the ball joint remains securely attached.

Steering System

Components related to the vehicle's steering system, including tie rods, sway bars, and steering gear.

1

Tie Rod End Nut

M8 x 1.25
Torque Value
33 ft-lbs (45 N·m)
Important Notes
This nut secures the tie rod end to the steering knuckle. Proper torque ensures proper steering alignment.
2

Sway Bar Link Nut

M8 x 1.25
Torque Value
33 ft-lbs (45 N·m)
Important Notes
This nut connects the sway bar link to the sway bar and suspension. Proper torque ensures the sway bar functions correctly.
3

Steering Gear/Rack Bolts

M10 x 1.25
Torque Value
74 ft-lbs (100 N·m)
Important Notes
These bolts secure the steering rack to the vehicle's subframe or chassis. Proper torque ensures the steering system remains stable.

Fuel System

Components related to the vehicle's fuel system, including tank straps and filler neck attachments.

1

Fuel Tank Strap Bolts

M6 x 1.0
Torque Value
18 ft-lbs (25 N·m)
Important Notes
These bolts secure the fuel tank straps to the vehicle's chassis. Proper torque ensures the fuel tank remains securely mounted.
2

Fuel Filler Neck Bolts

M6 x 1.0
Torque Value
18 ft-lbs (25 N·m)
Important Notes
These bolts secure the fuel filler neck to the vehicle's body. Proper torque ensures a secure connection.

Safety System

Components related to the vehicle's safety systems, including seat belt anchors and subframe attachments.

1

Seat Belt Anchorage Bolts

M8 x 1.25
Torque Value
37 ft-lbs (50 N·m)
Important Notes
These bolts secure the seat belt anchors to the vehicle's body structure. Proper torque is critical for occupant safety.
2

Subframe Mounting Bolts

M10 x 1.25
Torque Value
74 ft-lbs (100 N·m)
Important Notes
These bolts secure the subframe to the vehicle's body. Proper torque ensures the subframe remains securely attached.

Body System

Components related to the vehicle's body structure, including door hinges, bumper mounts, and radiator supports.

1

Door Hinge Bolts

M6 x 1.0
Torque Value
18 ft-lbs (25 N·m)
Important Notes
These bolts secure the door hinges to the vehicle's body. Proper torque ensures the doors remain aligned and function correctly.
2

Bumper Mounting Bolts

M6 x 1.0
Torque Value
18 ft-lbs (25 N·m)
Important Notes
These bolts secure the bumper to the vehicle's body. Proper torque ensures the bumper remains securely attached.
3

Radiator Support Bolts

M6 x 1.0
Torque Value
18 ft-lbs (25 N·m)
Important Notes
These bolts secure the radiator support to the vehicle's body. Proper torque ensures the radiator remains properly aligned.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What is the torque specification for the body bolts on a 2009-2017 Volkswagen CC?

The torque specification for the body bolts on a 2009-2017 Volkswagen CC typically ranges between 80-100 Nm (59-74 ft-lbs), depending on the specific bolt location and size. Always refer to the vehicle's service manual or a reliable repair guide for exact specifications.

Q2

Can I reuse body bolts after removal?

It is generally not recommended to reuse body bolts, as they are often designed as torque-to-yield (TTY) bolts. These bolts stretch during installation and may lose their clamping force if reused. Always replace them with new bolts to ensure proper torque and safety.

Q3

What happens if I over-torque the body bolts?

Over-torquing body bolts can lead to thread stripping, bolt failure, or damage to the vehicle's frame. This can compromise the structural integrity of the vehicle and lead to safety hazards. Always use a calibrated torque wrench and follow the manufacturer's specifications.

Q4

How often should body bolts be checked for proper torque?

Body bolts should be checked for proper torque during routine maintenance or after any repair work involving the body or frame. If you notice unusual noises, vibrations, or alignment issues, inspect the bolts immediately.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench

A precision tool for applying accurate torque to body bolts.

  • Adjustable torque settings
  • Digital display for precise readings
Learn more

Torque Angle Gauge

Used to measure the angle of rotation when tightening bolts to ensure proper torque.

  • Magnetic base for easy attachment
  • Clear angle markings
Learn more

Socket Set

A set of sockets compatible with body bolts for secure tightening.

  • Includes various sizes
  • Durable construction
Learn more
Service Procedures

Body Bolt Torque Application

Procedure for applying the correct torque to body bolts on a 2009-2017 Volkswagen CC.

  • Ensure the vehicle is on a flat surface and properly supported.
  • Locate the body bolts requiring torque application.
  • Clean the bolt threads and surrounding area to ensure proper torque readings.
  • Attach the appropriate socket to the torque wrench.
  • Set the torque wrench to the specified torque value (refer to the vehicle's service manual).
  • Tighten the bolt to the specified torque in a clockwise direction.
  • Use a torque angle gauge to apply the final angle tightening if required.
  • Double-check the torque settings to ensure accuracy.
View full procedure
Technical Service Bulletins

Body Bolt Torque Specification Update

2015-03-12

Updated torque specifications for body bolts on 2009-2017 Volkswagen CC models.

2009-2017 Volkswagen CC

Resolution: Refer to the updated torque specifications in the service manual and ensure all body bolts are tightened to the new values.

Body Bolt Corrosion Prevention

2016-07-22

Technical bulletin addressing body bolt corrosion issues in 2009-2017 Volkswagen CC models.

2009-2017 Volkswagen CC

Resolution: Apply anti-corrosion coating to body bolts during installation and periodically inspect for signs of corrosion.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Volkswagen Specs. All rights reserved.

Privacy Policy Terms of Service