Volkswagen Vehicle Models Volkswagen Arteon 2019-present
Volkswagen Vehicle Models Volkswagen Arteon 2019-present Torque Specifications
Complete Volkswagen Vehicle Models Volkswagen Arteon 2019-present torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
2.0l I4 Engine
Torque specifications for 2.0L-I4 Engine
2.0l I4 Engine
Torque specifications for 2.0L-I4 Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.25
1
Cylinder Head Bolts
M10 x 1.25
Torque Specification
1. 18 ft-lbs (25 N·m)
2. 90°
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M12 x 1.5
1
Main Bearing Bolts
M12 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Follow the manufacturer's specified torque sequence to ensure proper alignment.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure the connecting rod bearings are properly seated before tightening.
Timing System
1 Camshaft Sprocket Bolt
M10 x 1.25
1
Camshaft Sprocket Bolt
M10 x 1.25
Torque Specification
63 ft-lbs (85 N·m)
Important Notes
Ensure the timing marks are aligned before tightening.
2 Timing Belt/Chain Tensioner Bolt
M8 x 1.25
2
Timing Belt/Chain Tensioner Bolt
M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
Intake And Exhaust
1 Intake Manifold Bolts
M8 x 1.25
1
Intake Manifold Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2 Exhaust Manifold Bolts
M8 x 1.25
2
Exhaust Manifold Bolts
M8 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.
Lubrication System
1 Oil Pan Bolts
M6 x 1.0
1
Oil Pan Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2 Oil Drain Plug Bolt
M14 x 1.5
2
Oil Drain Plug Bolt
M14 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Replace the crush washer to prevent leaks.
2.0l I4 Turbo Engine
Torque specifications for 2.0L-I4-TURBO Engine
2.0l I4 Turbo Engine
Torque specifications for 2.0L-I4-TURBO Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.25
1
Cylinder Head Bolts
M10 x 1.25
Torque Specification
1. 18 ft-lbs (25 N·m)
2. 90°
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M12 x 1.5
1
Main Bearing Bolts
M12 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Follow the manufacturer's specified torque sequence to ensure proper alignment.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure the connecting rod bearings are properly seated before tightening.
Timing System
1 Camshaft Sprocket Bolt
M10 x 1.25
1
Camshaft Sprocket Bolt
M10 x 1.25
Torque Specification
63 ft-lbs (85 N·m)
Important Notes
Ensure the timing marks are aligned before tightening.
2 Timing Belt/Chain Tensioner Bolt
M8 x 1.25
2
Timing Belt/Chain Tensioner Bolt
M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
Intake And Exhaust
1 Intake Manifold Bolts
M8 x 1.25
1
Intake Manifold Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2 Exhaust Manifold Bolts
M8 x 1.25
2
Exhaust Manifold Bolts
M8 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.
Lubrication System
1 Oil Pan Bolts
M6 x 1.0
1
Oil Pan Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2 Oil Drain Plug Bolt
M14 x 1.5
2
Oil Drain Plug Bolt
M14 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Replace the crush washer to prevent leaks.
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension And Steering
1 Wheel Lug Nuts
M12 x 1.5
1
Wheel Lug Nuts
M12 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Use a star pattern for tightening to ensure even pressure.
2 Strut/Shock Absorber Mounting Bolts
M10 x 1.25
2
Strut/Shock Absorber Mounting Bolts
M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure the vehicle is on a level surface before tightening.
3 Control Arm Bolts
M14 x 1.5
3
Control Arm Bolts
M14 x 1.5
Torque Specification
83 ft-lbs (113 N·m)
Important Notes
Ensure proper alignment before final torque.
4 Ball Joint Nut
M12 x 1.25
4
Ball Joint Nut
M12 x 1.25
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure the ball joint is properly seated before tightening.
5 Tie Rod End Nut
M10 x 1.25
5
Tie Rod End Nut
M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper alignment before final torque.
6 Sway Bar Link Nut
M8 x 1.25
6
Sway Bar Link Nut
M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure the sway bar is properly aligned before tightening.
7 Steering Gear/Rack Bolts
M12 x 1.75
7
Steering Gear/Rack Bolts
M12 x 1.75
Torque Specification
110 ft-lbs (149 N·m)
Important Notes
Use a crisscross pattern for tightening.
Fuel System
1 Fuel Tank Strap Bolts
M8 x 1.25
1
Fuel Tank Strap Bolts
M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the fuel tank is properly aligned before tightening.
2 Fuel Filler Neck Bolts
M6 x 1.0
2
Fuel Filler Neck Bolts
M6 x 1.0
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure the filler neck is properly seated before tightening.
Electrical System
1 Battery Terminal Nuts
M6 x 1.0
1
Battery Terminal Nuts
M6 x 1.0
Torque Specification
5 ft-lbs (7 N·m)
Important Notes
Ensure the terminals are clean and free of corrosion before tightening.
Body And Interior
1 Body Panel Bolts (e.g., fenders, doors, hood, trunk)
M6 x 1.0
1
Body Panel Bolts (e.g., fenders, doors, hood, trunk)
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar components. Ensure panels are properly aligned before tightening.
2 Seat Belt Anchorage Bolts
M10 x 1.25
2
Seat Belt Anchorage Bolts
M10 x 1.25
Torque Specification
38 ft-lbs (51 N·m)
Important Notes
Estimated value based on similar components. Critical for occupant safety.
3 Roof Rack Mounting Bolts
M8 x 1.25
3
Roof Rack Mounting Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on similar components. Ensure the roof rack is properly aligned before tightening.
4 Door Hinge Bolts
M8 x 1.25
4
Door Hinge Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on similar components. Ensure proper door alignment before tightening.
5 Bumper Mounting Bolts
M8 x 1.25
5
Bumper Mounting Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on similar components. Ensure the bumper is properly aligned before tightening.
6 Suspension Subframe Bolts
M12 x 1.75
6
Suspension Subframe Bolts
M12 x 1.75
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Estimated value based on similar components. Use a crisscross pattern for tightening.
7 Spare Tire Carrier Bolts
M8 x 1.25
7
Spare Tire Carrier Bolts
M8 x 1.25
Torque Specification
24 ft-lbs (32 N·m)
Important Notes
Estimated value based on similar components. Ensure the spare tire carrier is properly aligned before tightening.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper System
1 Brake Caliper Bolts
M12 x 1.5
1
Brake Caliper Bolts
M12 x 1.5
Torque Specification
79 ft-lbs (107 N·m)
Important Notes
Ensure the caliper is properly aligned with the rotor before torquing.
2 Brake Caliper Mounting Bracket Bolts
M14 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M14 x 1.5
Torque Specification
148 ft-lbs (200 N·m)
Important Notes
Ensure the mounting bracket is securely attached to the steering knuckle or axle.
Brake Rotor Drum System
1 Brake Disc/Drum Retaining Bolts
M10 x 1.25
1
Brake Disc/Drum Retaining Bolts
M10 x 1.25
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Ensure the rotor or drum is properly seated on the hub before torquing.
Wheel Attachment System
1 Wheel Lug Nuts
M12 x 1.5
1
Wheel Lug Nuts
M12 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Always torque lug nuts in a star pattern to ensure even clamping force.
Brake Hydraulic System
1 Brake Hose Banjo Bolt
M10 x 1.0
1
Brake Hose Banjo Bolt
M10 x 1.0
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the sealing washers are properly installed and not damaged.
2 Brake Master Cylinder Mounting Bolts
M8 x 1.25
2
Brake Master Cylinder Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the master cylinder is properly aligned with the brake booster or firewall.
Brake Booster System
1 Brake Booster Mounting Bolts
M8 x 1.25
1
Brake Booster Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the brake booster is properly aligned with the firewall.
Brake Pedal System
1 Brake Pedal Assembly Bolts
M8 x 1.25
1
Brake Pedal Assembly Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the brake pedal is properly aligned with the master cylinder pushrod.
Abs System
1 ABS Sensor Mounting Bolts
M6 x 1.0
1
ABS Sensor Mounting Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the ABS sensor is properly aligned with the tone ring.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Engine Transmission Interface
1 Flywheel Bolts
M10 x 1.25
1
Flywheel Bolts
M10 x 1.25
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure proper alignment of the flywheel before tightening.
2 Torque Converter Bolts
M8 x 1.25
2
Torque Converter Bolts
M8 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on similar components. Ensure the torque converter is properly seated.
3 Transmission Bellhousing Bolts
M10 x 1.5
3
Transmission Bellhousing Bolts
M10 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Estimated value based on similar components. Ensure proper alignment of the transmission.
Transmission Mounting
1 Transmission Mounting Bolts
M10 x 1.5
1
Transmission Mounting Bolts
M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the transmission is properly aligned before tightening.
Driveshaft And Axles
1 Drive Axle/Half Shaft Bolts
M12 x 1.5
1
Drive Axle/Half Shaft Bolts
M12 x 1.5
Torque Specification
75 ft-lbs (101 N·m)
Important Notes
Ensure proper alignment of the drive axles before tightening.
2 CV Joint/Axle Nut
M24 x 1.5
2
CV Joint/Axle Nut
M24 x 1.5
Torque Specification
217 ft-lbs (294 N·m)
Important Notes
Ensure the CV joint is properly seated before tightening.
3 Propeller/Drive Shaft Bolts
M10 x 1.25
3
Propeller/Drive Shaft Bolts
M10 x 1.25
Torque Specification
44 ft-lbs (59 N·m)
Important Notes
Ensure proper alignment of the drive shaft before tightening.
Differential And Transfer Case
1 Differential Mounting Bolts
M12 x 1.5
1
Differential Mounting Bolts
M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated value based on similar components. Ensure proper alignment of the differential.
2 Transfer Case Mounting Bolts
M10 x 1.5
2
Transfer Case Mounting Bolts
M10 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated value based on similar components. Ensure proper alignment of the transfer case.
3 Differential Drain/Fill Plug
M12 x 1.5
3
Differential Drain/Fill Plug
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on similar components. Ensure the plug is properly seated.
4 Transfer Case Drain/Fill Plug
M12 x 1.5
4
Transfer Case Drain/Fill Plug
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on similar components. Ensure the plug is properly seated.
Transmission Fluid System
1 Transmission Oil Pan Bolts
M6 x 1.0
1
Transmission Oil Pan Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure proper alignment of the oil pan before tightening.
2 Transmission Drain and Fill Plugs
M12 x 1.5
2
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure the plugs are properly seated before tightening.
Dsg7 Transmission
Torque specifications for Dsg7 Transmission
Dsg7 Transmission
Torque specifications for Dsg7 Transmission
Flywheel
1 Flywheel Bolts
M10 x 1.25
1
Flywheel Bolts
M10 x 1.25
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure proper alignment of the flywheel before tightening. Use a crisscross pattern for torque sequence.
Transmission Mounting
1 Transmission Mounting Bolts
M8 x 1.25
1
Transmission Mounting Bolts
M8 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the transmission is properly aligned before tightening.
Oil Pan
1 Transmission Oil Pan Bolts
M6 x 1.0
1
Transmission Oil Pan Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Avoid over-tightening to prevent gasket damage.
Fluid Plugs
1 Transmission Drain and Fill Plugs
M14 x 1.5
1
Transmission Drain and Fill Plugs
M14 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Use a new sealing washer for each plug.
Drive Axles
1 Drive Axle/Half Shaft Bolts
M12 x 1.5
1
Drive Axle/Half Shaft Bolts
M12 x 1.5
Torque Specification
75 ft-lbs (101 N·m)
Important Notes
Ensure the axle is properly seated before tightening.
2 CV Joint/Axle Nut
M24 x 1.5
2
CV Joint/Axle Nut
M24 x 1.5
Torque Specification
217 ft-lbs (294 N·m)
Important Notes
Use a new cotter pin after tightening.
Mechatronics
1 Mechatronics Unit Bolts
M6 x 1.0
1
Mechatronics Unit Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value. Verify with OEM manual.
Clutch Pack
1 Clutch Pack Bolts
M8 x 1.25
1
Clutch Pack Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value. Verify with OEM manual.
Input Output Shafts
1 Input Shaft Bolts
M8 x 1.25
1
Input Shaft Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Verify with OEM manual.
2 Output Shaft Bolts
M8 x 1.25
2
Output Shaft Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Verify with OEM manual.
Bellhousing
1 Transmission Bellhousing Bolts
M8 x 1.25
1
Transmission Bellhousing Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value. Verify with OEM manual.
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Battery System
1 Battery Terminal Nuts
M6 x 1.0
1
Battery Terminal Nuts
M6 x 1.0
Torque Specification
5 ft-lbs (7 N·m)
Important Notes
Ensure terminals are clean and free of corrosion before tightening.
2 Ground Strap Bolts
M6 x 1.0
2
Ground Strap Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar electrical grounding components.
Starter System
1 Starter Motor Mounting Bolts
M10 x 1.5
1
Starter Motor Mounting Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure starter motor is properly aligned before tightening.
Charging System
1 Alternator Mounting Bolts
M8 x 1.25
1
Alternator Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure alternator belt is properly tensioned after tightening.
Ignition System
1 Ignition Coil Bolt
M6 x 1.0
1
Ignition Coil Bolt
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure ignition coil is properly seated before tightening.
Fuel System
1 Fuel Pump Mounting Bolts
M6 x 1.0
1
Fuel Pump Mounting Bolts
M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure fuel pump is properly aligned before tightening.
Ac System
1 A/C Compressor Mounting Bolts
M8 x 1.25
1
A/C Compressor Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure A/C compressor belt is properly tensioned after tightening.
Electrical Control System
1 Fuse Box Mounting Bolts
M6 x 1.0
1
Fuse Box Mounting Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar electrical components.
2 ECU (Engine Control Unit) Mounting Bolts
M6 x 1.0
2
ECU (Engine Control Unit) Mounting Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar electrical components.
3 Wiring Harness Retaining Bolts
M6 x 1.0
3
Wiring Harness Retaining Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar electrical components.
Steering System
1 Electric Power Steering (EPS) Motor Mounting Bolts
M8 x 1.25
1
Electric Power Steering (EPS) Motor Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure EPS motor is properly aligned before tightening.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
Exhaust Manifold Headers
1 Exhaust Manifold/Headers Bolts
M10 x 1.25
1
Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute torque.
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute torque.
Exhaust Pipe Connections
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute torque.
2 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
2
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute torque.
Emissions Control Components
1 EGR Valve Bolts
M6 x 1.0
1
EGR Valve Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the EGR valve is properly aligned before tightening.
2 Oxygen Sensor (O2 Sensor) Mounting Nut
M12 x 1.25
2
Oxygen Sensor (O2 Sensor) Mounting Nut
M12 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure the sensor is properly aligned before tightening.
3 NOx Sensor Mounting Bolts
M8 x 1.25
3
NOx Sensor Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the sensor is properly aligned before tightening.
4 DPF (Diesel Particulate Filter) Mounting Bolts
M10 x 1.25
4
DPF (Diesel Particulate Filter) Mounting Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute torque.
5 Exhaust Gas Temperature Sensor Mounting Bolts
M6 x 1.0
5
Exhaust Gas Temperature Sensor Mounting Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the sensor is properly aligned before tightening.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold Headers
1 Exhaust Manifold/Headers Bolts
M10 x 1.25
1
Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
Exhaust Pipe Connections
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure gasket is properly seated before tightening.
2 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
2
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure gasket is properly seated before tightening.
3 Muffler to Exhaust Pipe Bolts
M10 x 1.25
3
Muffler to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure gasket is properly seated before tightening.
4 Exhaust Flange Bolts (Downpipe to Midpipe)
M10 x 1.25
4
Exhaust Flange Bolts (Downpipe to Midpipe)
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure gasket is properly seated before tightening.
Exhaust Accessories
1 Exhaust Heat Shield Bolts
M6 x 1.0
1
Exhaust Heat Shield Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Avoid over-tightening to prevent damage to the heat shield.
2 Oxygen Sensor (O2 Sensor) Mounting Nut
M12 x 1.25
2
Oxygen Sensor (O2 Sensor) Mounting Nut
M12 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure the sensor is properly seated before tightening.
3 Exhaust Hanger Bolts
M8 x 1.25
3
Exhaust Hanger Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure hangers are properly aligned before tightening.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Rail System
1 Fuel Rail Bolts
M6 x 1.0
1
Fuel Rail Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2 Fuel Injector Bolts
M6 x 1.0
2
Fuel Injector Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure injectors are properly seated before tightening.
Fuel Pump System
1 Fuel Pump Mounting Bolts
M8 x 1.25
1
Fuel Pump Mounting Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the fuel pump is properly aligned before tightening.
2 High-Pressure Fuel Pump Bolts
M8 x 1.25
2
High-Pressure Fuel Pump Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar components. Ensure proper alignment of the pump.
Fuel Tank System
1 Fuel Tank Strap Bolts
M10 x 1.5
1
Fuel Tank Strap Bolts
M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the tank is properly positioned before tightening.
2 Fuel Filler Neck Bolts
M8 x 1.25
2
Fuel Filler Neck Bolts
M8 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure the filler neck is properly aligned with the tank.
3 Fuel Tank Sender Unit Bolts
M6 x 1.0
3
Fuel Tank Sender Unit Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the sender unit is properly seated before tightening.
Fuel Filter System
1 Fuel Filter Bolt/Nut
M6 x 1.0
1
Fuel Filter Bolt/Nut
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components. Hand-tighten if no torque value is specified.
Fuel Pressure Components
1 Fuel Pressure Regulator Bolts
M6 x 1.0
1
Fuel Pressure Regulator Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the regulator is properly seated before tightening.
2 Fuel Pressure Sensor Bolts
M6 x 1.0
2
Fuel Pressure Sensor Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the sensor is properly seated before tightening.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
Ac Compressor
1 A/C Compressor Mounting Bolts
M10 x 1.5
1
A/C Compressor Mounting Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.
Ac Lines
1 A/C Line Fittings
M12 x 1.25
1
A/C Line Fittings
M12 x 1.25
Torque Specification
N/A
Important Notes
Hand-tighten only. Over-tightening can damage the fittings or cause refrigerant leaks.
Evaporator Housing
1 Evaporator Housing Bolts
M6 x 1.0
1
Evaporator Housing Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components. Ensure bolts are tightened evenly to avoid warping the housing.
Blower Motor
1 Blower Motor Mounting Bolts
M6 x 1.0
1
Blower Motor Mounting Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components. Ensure the motor is properly aligned before tightening.
Heater Core
1 Heater Core Inlet/Outlet Pipe Bolts
M6 x 1.0
1
Heater Core Inlet/Outlet Pipe Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components. Ensure the pipes are properly aligned before tightening.
Hvac Control Module
1 HVAC Control Module Mounting Bolts
M6 x 1.0
1
HVAC Control Module Mounting Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components. Ensure the module is properly aligned before tightening.
Condenser
1 Condenser Mounting Bolts
M10 x 1.5
1
Condenser Mounting Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Strut Shock Absorber
1 Strut/Shock Absorber Mounting Bolts
M10 x 1.25
1
Strut/Shock Absorber Mounting Bolts
M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure bolts are tightened evenly to avoid misalignment.
2 Lower Strut Mount Bolts
M12 x 1.5
2
Lower Strut Mount Bolts
M12 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated value based on similar suspension components.
3 Upper Strut Mount Bolts
M10 x 1.25
3
Upper Strut Mount Bolts
M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure bolts are tightened evenly to avoid noise or misalignment.
Control Arm Ball Joint
1 Control Arm Bolts
M14 x 1.5
1
Control Arm Bolts
M14 x 1.5
Torque Specification
83 ft-lbs (113 N·m)
Important Notes
Ensure bolts are tightened evenly to prevent premature wear.
2 Ball Joint Nut
M12 x 1.25
2
Ball Joint Nut
M12 x 1.25
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure the ball joint is properly seated before tightening.
Steering System
1 Tie Rod End Nut
M10 x 1.25
1
Tie Rod End Nut
M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the tie rod end is properly seated before tightening.
2 Steering Gear/Rack Bolts
M16 x 1.5
2
Steering Gear/Rack Bolts
M16 x 1.5
Torque Specification
1. 55 ft-lbs (75 N·m)
2. 90°
Important Notes
Follow the torque sequence to ensure proper alignment.
Sway Bar
1 Sway Bar Link Nut
M10 x 1.25
1
Sway Bar Link Nut
M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure the sway bar link is properly seated before tightening.
Drive Axle
1 Drive Axle/Half Shaft Bolts
M12 x 1.25
1
Drive Axle/Half Shaft Bolts
M12 x 1.25
Torque Specification
75 ft-lbs (101 N·m)
Important Notes
Ensure bolts are tightened evenly to prevent slippage.
2 CV Joint/Axle Nut
M24 x 1.5
2
CV Joint/Axle Nut
M24 x 1.5
Torque Specification
217 ft-lbs (294 N·m)
Important Notes
Ensure the CV joint is properly seated before tightening.
Subframe
1 Subframe Mounting Bolts
M14 x 1.5
1
Subframe Mounting Bolts
M14 x 1.5
Torque Specification
1. 45 ft-lbs (61 N·m)
2. 90°
Important Notes
Follow the torque sequence to ensure proper alignment.
Wheel Bearing Hub
1 Wheel Bearing Hub Bolts
M12 x 1.25
1
Wheel Bearing Hub Bolts
M12 x 1.25
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure bolts are tightened evenly to prevent bearing failure.
Rear Trailing Arm
1 Rear Trailing Arm Bolts
M14 x 1.5
1
Rear Trailing Arm Bolts
M14 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Ensure bolts are tightened evenly to prevent misalignment.
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the recommended torque values for head bolts on a 2020 Volkswagen Arteon?
Q1
What are the recommended torque values for head bolts on a 2020 Volkswagen Arteon?
Cylinder head bolts should be tightened gradually, and in three sequences. The first round should be to 30 Nm (22 ft-lb), the second to 60 Nm (44 ft-lb), and the final torque value must be 90 Nm (66 ft-lb) for all head bolts.
Q2 What IS the proper torque specification for the oil filter housing cap on a 2023 Volkswagen Arteon?
Q2
What IS the proper torque specification for the oil filter housing cap on a 2023 Volkswagen Arteon?
The oil filter housing cap should be torqued to 25 Nm (18.4 ft-lb) for the diesel engine and 30 Nm (22 ft-lb) for the gasoline engine.
Q3 What torque wrench should I use for suspension component bolts on my 2022 Volkswagen Arteon?
Q3
What torque wrench should I use for suspension component bolts on my 2022 Volkswagen Arteon?
It IS recommended to use a torque wrench with a range of 0-100 Nm (0-74 ft-lb) that meets DIN EN ISO 6789-1:2017-07 standards.
Q4 How do I properly tighten lug nuts on my 2021 Volkswagen Arteon?
Q4
How do I properly tighten lug nuts on my 2021 Volkswagen Arteon?
Tighten the lug nuts to 120 Nm (89 ft-lb) using a torque wrench. Follow a star pattern and tighten the nuts in several steps, rather than all at once.
Q5 What IS the torque specification for the spark plugs on a 2019 Volkswagen Arteon?
Q5
What IS the torque specification for the spark plugs on a 2019 Volkswagen Arteon?
Spark plugs should be tightened to 25 Nm (18 ft-lb) plus an additional 90 degrees.
Q6 Do I need to use a torque wrench for all maintenance and repairs on my 2023 Volkswagen Arteon?
Q6
Do I need to use a torque wrench for all maintenance and repairs on my 2023 Volkswagen Arteon?
Yes, it IS highly recommended to use a torque wrench for proper tightening of bolts and nuts to the specified torque values. Failure to do so can lead to component failure or unsafe conditions.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the arteon.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
Service Procedures
Technical Service Bulletins
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.