Volkswagen Vehicle Models Volkswagen Golf 2013-2019 Torque Specifications
Volkswagen Vehicle Models Volkswagen Golf 2013-2019

Volkswagen Vehicle Models Volkswagen Golf 2013-2019 Torque Specifications

Complete Volkswagen Vehicle Models Volkswagen Golf 2013-2019 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

1.2l I4 Engine

Torque specifications for 1.2L-I4 Engine

Crankshaft And Main Bearings

1

Main Bearing Bolts

M10 x 1.25
Torque Specification
52 ft-lbs (70 N·m)
Important Notes
Ensure proper sequence is followed to avoid crankshaft distortion.
2

Crankshaft Pulley/Harmonic Balancer Bolt

M12 x 1.5
Torque Specification
81 ft-lbs (110 N·m)
Important Notes
Ensure the crankshaft is held stationary during tightening.

Connecting Rods

1

Connecting Rod Nuts

M8 x 1.0
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure rod caps are properly aligned before tightening.

Flywheel

1

Flywheel Bolts

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure the flywheel is properly seated before tightening.

Valve Train

1

Valve Cover Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure the camshaft is held stationary during tightening.
3

Rocker Arms/Shafts Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper valve clearance before tightening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper tensioner alignment before tightening.

Fuel System

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the fuel rail is properly seated before tightening.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the injectors are properly seated before tightening.
3

High-Pressure Fuel Pump Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the pump is properly aligned before tightening.

Cooling System

1

Water Pump Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.
2

Thermostat Housing Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.
3

Oil Cooler Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the oil cooler is properly aligned before tightening.

Turbocharger System

1

Turbocharger Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the turbocharger is properly aligned before tightening.
2

Intercooler Pipe Clamps

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the clamps are properly seated before tightening.

Exhaust System

1

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the manifold is properly seated before tightening.
2

EGR Valve Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.

Ignition System

1

Spark Plugs

M14 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the spark plugs are properly seated before tightening.
2

Ignition Coil Bolt

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the ignition coil is properly seated before tightening.

Lubrication System

1

Oil Drain Plug

M14 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the drain plug is properly seated before tightening.

1.2l I4 Turbo Engine

Torque specifications for 1.2L-I4-TURBO Engine

Crankshaft And Main Bearings

1

Main Bearing Bolts

M10 x 1.25
Torque Specification
52 ft-lbs (70 N·m)
Important Notes
Ensure proper sequence is followed to avoid crankshaft distortion.
2

Crankshaft Pulley/Harmonic Balancer Bolt

M12 x 1.5
Torque Specification
81 ft-lbs (110 N·m)
Important Notes
Ensure the crankshaft is held stationary during tightening.

Connecting Rods

1

Connecting Rod Nuts

M8 x 1.0
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure rod caps are properly aligned before tightening.

Flywheel

1

Flywheel Bolts

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure the flywheel is properly seated before tightening.

Valve Train

1

Valve Cover Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure the camshaft is held stationary during tightening.
3

Rocker Arms/Shafts Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper valve clearance before tightening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper tensioner alignment before tightening.

Fuel System

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the fuel rail is properly seated before tightening.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the injectors are properly seated before tightening.
3

High-Pressure Fuel Pump Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the pump is properly aligned before tightening.

Cooling System

1

Water Pump Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.
2

Thermostat Housing Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.
3

Oil Cooler Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the oil cooler is properly aligned before tightening.

Turbocharger System

1

Turbocharger Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the turbocharger is properly aligned before tightening.
2

Intercooler Pipe Clamps

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the clamps are properly seated before tightening.

Exhaust System

1

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the manifold is properly seated before tightening.
2

EGR Valve Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.

Ignition System

1

Spark Plugs

M14 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the spark plugs are properly seated before tightening.
2

Ignition Coil Bolt

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the ignition coil is properly seated before tightening.

Lubrication System

1

Oil Drain Plug

M14 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the drain plug is properly seated before tightening.

1.4l I4 Engine

Torque specifications for 1.4L-I4 Engine

Engine Block

1

Main Bearing Bolts

M10 x 1.25
Torque Specification
52 ft-lbs (70 N·m)
Important Notes
Ensure proper alignment of crankshaft before torquing.
2

Connecting Rod Nuts

M8 x 1.0
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure proper alignment of connecting rods before torquing.
3

Flywheel Bolts

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure flywheel is properly seated before torquing.

Cylinder Head

1

Valve Cover Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure valve cover gasket is properly seated before torquing.
2

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure timing marks are aligned before torquing.
3

Rocker Arms/Shafts Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure rocker arms are properly seated before torquing.

Turbocharger

1

Turbocharger Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure turbocharger is properly aligned before torquing.
2

Turbocharger Oil Feed Line Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure oil feed line is properly seated before torquing.
3

Turbocharger Coolant Line Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure coolant lines are properly seated before torquing.

Cooling System

1

Water Pump Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure water pump gasket is properly seated before torquing.
2

Thermostat Housing Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure thermostat housing gasket is properly seated before torquing.

1.4l I4 Turbo Engine

Torque specifications for 1.4L-I4-TURBO Engine

Engine Block

1

Main Bearing Bolts

M10 x 1.25
Torque Specification
52 ft-lbs (70 N·m)
Important Notes
Ensure proper alignment of crankshaft before torquing.
2

Connecting Rod Nuts

M8 x 1.0
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure proper alignment of connecting rods before torquing.
3

Flywheel Bolts

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure flywheel is properly seated before torquing.

Cylinder Head

1

Valve Cover Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure valve cover gasket is properly seated before torquing.
2

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure timing marks are aligned before torquing.
3

Rocker Arms/Shafts Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure rocker arms are properly seated before torquing.

Turbocharger

1

Turbocharger Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure turbocharger is properly aligned before torquing.
2

Turbocharger Oil Feed Line Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure oil feed line is properly seated before torquing.
3

Turbocharger Coolant Line Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure coolant lines are properly seated before torquing.

Cooling System

1

Water Pump Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure water pump gasket is properly seated before torquing.
2

Thermostat Housing Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure thermostat housing gasket is properly seated before torquing.

1.8l I4 Engine

Torque specifications for 1.8L-I4 Engine

Engine Block and Crankshaft

1

Main Bearing Bolts

M14 x 1.5
Torque Specification
52 ft-lbs (70 N·m)
Important Notes
Proper torque ensures the bearings are seated correctly and the crankshaft is secure.
2

Connecting Rod Nuts

M12 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Proper torque ensures the rods are securely attached and the engine runs smoothly.
3

Flywheel Bolts

M16 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Proper torque ensures the flywheel is securely attached and the engine runs smoothly.

Cylinder Head and Valvetrain

1

Valve Cover Bolts

M10 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Proper torque ensures the valve cover is securely attached and the engine runs smoothly.
2

Spark Plugs

M14 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Proper torque ensures the spark plugs are securely attached and the engine runs smoothly.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M12 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Proper torque ensures the tensioner is securely attached and the engine runs smoothly.

Turbocharger and Intercooler

1

Turbocharger Mounting Bolts

M14 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Proper torque ensures the turbocharger is securely attached and the engine runs smoothly. (Estimated value)
2

Intercooler Mounting Bolts

M12 x 1.25
Torque Specification
20 ft-lbs (25 N·m)
Important Notes
Proper torque ensures the intercooler is securely attached and the engine runs smoothly. (Estimated value)

Engine Mounts and Oil Pan

1

Engine Mounting Bolts

M16 x 1.5
Torque Specification
40 ft-lbs (50 N·m)
Important Notes
Proper torque ensures the engine is securely attached and the engine runs smoothly. (Estimated value)
2

Oil Drain Plug Bolt

M14 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Proper torque ensures the oil drain plug is securely attached and the engine runs smoothly.

1.8l I4 Turbo Engine

Torque specifications for 1.8L-I4-TURBO Engine

Engine Block and Crankshaft

1

Main Bearing Bolts

M14 x 1.5
Torque Specification
52 ft-lbs (70 N·m)
Important Notes
Proper torque ensures the bearings are seated correctly and the crankshaft is secure.
2

Connecting Rod Nuts

M12 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Proper torque ensures the rods are securely attached and the engine runs smoothly.
3

Flywheel Bolts

M16 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Proper torque ensures the flywheel is securely attached and the engine runs smoothly.

Cylinder Head and Valvetrain

1

Valve Cover Bolts

M10 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Proper torque ensures the valve cover is securely attached and the engine runs smoothly.
2

Spark Plugs

M14 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Proper torque ensures the spark plugs are securely attached and the engine runs smoothly.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M12 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Proper torque ensures the tensioner is securely attached and the engine runs smoothly.

Turbocharger and Intercooler

1

Turbocharger Mounting Bolts

M14 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Proper torque ensures the turbocharger is securely attached and the engine runs smoothly. (Estimated value)
2

Intercooler Mounting Bolts

M12 x 1.25
Torque Specification
20 ft-lbs (25 N·m)
Important Notes
Proper torque ensures the intercooler is securely attached and the engine runs smoothly. (Estimated value)

Engine Mounts and Oil Pan

1

Engine Mounting Bolts

M16 x 1.5
Torque Specification
40 ft-lbs (50 N·m)
Important Notes
Proper torque ensures the engine is securely attached and the engine runs smoothly. (Estimated value)
2

Oil Drain Plug Bolt

M14 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Proper torque ensures the oil drain plug is securely attached and the engine runs smoothly.

2.0l I4 Engine

Torque specifications for 2.0L-I4 Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 22 ft-lbs (30 N·m) 2. 90° 3. 90°
Important Notes
Torque sequence and angle tightening are critical. Refer to the service manual for the specific tightening pattern.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure even tightening to avoid warping the valve cover.

Crankshaft And Bearings

1

Main Bearing Bolts

M10 x 1.5
Torque Specification
52 ft-lbs (70 N·m)
Important Notes
Follow the specified tightening sequence to ensure proper alignment.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure proper torque to prevent rod failure.
3

Flywheel Bolts

M12 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Use thread locker and follow the specified tightening pattern.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper tension after tightening.
2

Camshaft Sprocket Bolt

M10 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure proper alignment before tightening.

Turbocharger System

1

Turbocharger Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper alignment and sealing.
2

Turbocharger Oil Feed Line Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure a tight seal to prevent oil leaks.

2.0l I4 Turbo Engine

Torque specifications for 2.0L-I4-TURBO Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 22 ft-lbs (30 N·m) 2. 90° 3. 90°
Important Notes
Torque sequence and angle tightening are critical. Refer to the service manual for the specific tightening pattern.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure even tightening to avoid warping the valve cover.

Crankshaft And Bearings

1

Main Bearing Bolts

M10 x 1.5
Torque Specification
52 ft-lbs (70 N·m)
Important Notes
Follow the specified tightening sequence to ensure proper alignment.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure proper torque to prevent rod failure.
3

Flywheel Bolts

M12 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Use thread locker and follow the specified tightening pattern.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper tension after tightening.
2

Camshaft Sprocket Bolt

M10 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure proper alignment before tightening.

Turbocharger System

1

Turbocharger Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper alignment and sealing.
2

Turbocharger Oil Feed Line Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure a tight seal to prevent oil leaks.

Body

Torque specifications for Body

Wheels And Suspension

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
89 ft-lbs (120 N·m)
Important Notes
Ensure proper tightening sequence (star pattern) to avoid warping the brake rotor.
2

Strut/Shock Absorber Mounting Bolts

M10 x 1.25
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated value based on typical M10 bolt specifications. Refer to the vehicle's service manual for exact values.
3

Control Arm Bolts

M12 x 1.75
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Estimated value based on typical M12 bolt specifications. Refer to the vehicle's service manual for exact values.
4

Ball Joint Nut

M14 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated value based on typical M14 bolt specifications. Refer to the vehicle's service manual for exact values.
5

Tie Rod End Nut

M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on typical M12 bolt specifications. Refer to the vehicle's service manual for exact values.
6

Sway Bar Link Nut

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on typical M10 bolt specifications. Refer to the vehicle's service manual for exact values.
7

Steering Gear/Rack Bolts

M12 x 1.75
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Estimated value based on typical M12 bolt specifications. Refer to the vehicle's service manual for exact values.

Body Panels And Structure

1

Body Panel Bolts (e.g., fender, door hinges, hood hinges)

M6 x 1.0
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated value based on typical M6 bolt specifications. Refer to the vehicle's service manual for exact values.
2

Seat Belt Anchorage Bolts

M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Critical for passenger safety. Ensure proper torque to maintain structural integrity.
3

Subframe Mounting Bolts

M12 x 1.75
Torque Specification
74 ft-lbs (100 N·m)
Important Notes
Ensure proper alignment of the subframe before tightening.
4

Roof Rack Mounting Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the roof rack is properly aligned before tightening.
5

Bumper Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the bumper is properly aligned before tightening.
6

Door Hinge Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper door alignment before tightening.
7

Hood Latch Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the hood latch operates smoothly after tightening.

Brakes

Torque specifications for Brakes

Brake Caliper and Mounting

1

Brake Caliper Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value, actual value may vary by model. Consult vehicle's service manual for accurate torque value.
2

Brake Caliper Mounting Bracket Bolts

M14 x 1.5
Torque Specification
40 ft-lbs (55 N·m)
Important Notes
Estimated value, actual value may vary by model. Consult vehicle's service manual for accurate torque value.

Brake Rotor and Disc

1

Brake Rotor Bolts

M10 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Recommended torque value, may vary depending on vehicle model and brake system configuration.
2

Brake Disc/Drum Retaining Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value, actual value may vary by model. Consult vehicle's service manual for accurate torque value.

Brake Pads and Retaining Clips

1

Brake Pad Retaining Clips

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Recommended torque value, may vary depending on vehicle model and brake system configuration.

Master Cylinder and Brake Lines

1

Master Cylinder Bolts

M10 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Recommended torque value, may vary depending on vehicle model and brake system configuration.
2

Brake Line Fittings

M12 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Recommended torque value, may vary depending on vehicle model and brake system configuration.

Wheel and Lug Nuts

1

Wheel Lug Nuts

M14 x 1.5
Torque Specification
1. 89 ft-lbs (120 N·m)
Important Notes
Recommended torque value, may vary depending on vehicle model and wheel configuration.

Dq250 Transmission

Torque specifications for Dq250 Transmission

Flywheel

1

Flywheel Bolts

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure the flywheel is properly aligned before tightening. Use a crisscross pattern for even torque distribution.

Transmission Mounting

1

Transmission Mounting Bolts

M12 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Estimated value based on similar M12 bolts. Ensure the transmission is properly aligned before tightening.

Oil Pan

1

Transmission Oil Pan Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar M6 bolts. Use a crisscross pattern to ensure even sealing.

Drain Fill Plugs

1

Transmission Drain Plug

M14 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on similar M14 bolts. Always replace the sealing washer.
2

Transmission Fill Plug

M14 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on similar M14 bolts. Always replace the sealing washer.

Drive Axle

1

Drive Axle Bolts

M10 x 1.25
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Estimated value based on similar M10 bolts. Use a crisscross pattern for even tightening.

Cv Joint

1

CV Joint Axle Nut

M24 x 1.5
Torque Specification
177 ft-lbs (240 N·m)
Important Notes
Estimated value based on similar M24 bolts. Always use a new axle nut.

Propeller Shaft

1

Propeller Shaft Bolts

M10 x 1.25
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Estimated value based on similar M10 bolts. Use a crisscross pattern for even tightening.

Bellhousing

1

Bellhousing Bolts

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure the bellhousing is properly aligned before tightening. Use a crisscross pattern for even torque distribution.

Input Shaft

1

Input Shaft Retaining Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the input shaft is properly seated before tightening.

Output Shaft

1

Output Shaft Flange Bolts

M8 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Use a crisscross pattern for even tightening.

Shift Linkage

1

Shift Linkage Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the shift linkage is properly aligned before tightening.

Mechatronic Unit

1

Mechatronic Unit Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Use a crisscross pattern for even tightening.

Drivetrain

Torque specifications for Drivetrain

Engine Transmission Interface

1

Flywheel Bolts

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure bolts are tightened in a star pattern to evenly distribute load.
2

Crankshaft Pulley/Harmonic Balancer Bolt

M14 x 1.5
Torque Specification
81 ft-lbs (110 N·m)
Important Notes
Use a holding tool to prevent the crankshaft from rotating during tightening.
3

Transmission Bellhousing Bolts

M12 x 1.75
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Estimated value based on similar bolt sizes and applications.

Transmission Mounting

1

Transmission Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on similar bolt sizes and applications.

Driveshaft And Axles

1

Drive Axle/Half Shaft Bolts

M12 x 1.25
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Estimated value based on similar bolt sizes and applications.
2

CV Joint/Axle Nut

M24 x 1.5
Torque Specification
180 ft-lbs (244 N·m)
Important Notes
Estimated value based on similar bolt sizes and applications.

Differential And Transfer Case

1

Differential Mounting Bolts

M12 x 1.75
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated value based on similar bolt sizes and applications.
2

Transfer Case Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on similar bolt sizes and applications.

Electrical

Torque specifications for Electrical

Ignition System

1

Ignition Coil Bolt

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Secure the ignition coil in place, ensuring proper spark plug firing and engine performance.

Starter Motor

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value varies by model, consult the vehicle's service manual for specific recommendations. Estimated value provided.

Alternator

1

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value varies by model, consult the vehicle's service manual for specific recommendations. Estimated value provided.

Battery and Grounding

1

Battery Terminal Nuts

M6 x 1.0
Torque Specification
5 ft-lbs (7 N·m)
Important Notes
Hand-tighten the nuts to secure the battery terminals in place.
2

Ground Strap Bolts

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Secure the ground strap in place, ensuring proper electrical system grounding and preventing damage to electrical components. Estimated value provided.

Electrical Connectors and Sensors

1

Electrical Connector Bolts

M5 x 0.8
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Secure the electrical connectors in place, ensuring proper electrical system function and preventing damage to electrical components. Estimated value provided.
2

Sensor Mounting Bolts

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Secure the sensors in place, ensuring proper electrical system function and engine performance. Estimated value provided.

Emissions Sensors

Torque specifications for Emissions_sensors

Egr System

1

EGR Valve Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the EGR valve is properly aligned before tightening.

Exhaust Manifold

1

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
1. 15 ft-lbs (20 N·m) 2. 90°
Important Notes
Estimated torque values based on typical M8 bolts. Refer to the vehicle's service manual for exact specifications.

Catalytic Converter

1

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated torque values based on typical M10 bolts. Refer to the vehicle's service manual for exact specifications.

Oxygen Sensors

1

Oxygen Sensor Mounting

M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated torque values based on typical M12 bolts. Refer to the vehicle's service manual for exact specifications.

Nox Sensors

1

NOx Sensor Mounting

M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated torque values based on typical M12 bolts. Refer to the vehicle's service manual for exact specifications.

Dpf System

1

DPF Mounting Bolts

M10 x 1.5
Torque Specification
1. 20 ft-lbs (27 N·m) 2. 90°
Important Notes
Estimated torque values based on typical M10 bolts. Refer to the vehicle's service manual for exact specifications.

Exhaust Temp Sensors

1

Exhaust Gas Temperature Sensor Mounting

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated torque values based on typical M8 bolts. Refer to the vehicle's service manual for exact specifications.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold System

1

Exhaust Manifold/Headers to Engine Block Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Torque values vary by model, consult service manual for specific values.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (35 N·m)
Important Notes
Torque values vary by model, consult service manual for specific values.

Exhaust Pipe System

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (25 N·m)
Important Notes
Torque values vary by model, consult service manual for specific values.
2

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (35 N·m)
Important Notes
Torque values vary by model, consult service manual for specific values.

Muffler and Tailpipe System

1

Muffler to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (25 N·m)
Important Notes
Torque values vary by model, consult service manual for specific values.

Exhaust System Mounting and Accessories

1

Exhaust System Mounting Bolts

M12 x 1.5
Torque Specification
20 ft-lbs (25 N·m)
Important Notes
General guideline, consult service manual for specific values.
2

Oxygen Sensor Bolts

M10 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
General guideline, consult service manual for specific values.
3

Heat Shield Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (15 N·m)
Important Notes
General guideline, consult service manual for specific values.
4

Exhaust Pipe Clamp Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (15 N·m)
Important Notes
General guideline, consult service manual for specific values.

Fuel

Torque specifications for Fuel

Fuel Delivery System

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure injectors are properly seated before tightening.
3

High-Pressure Fuel Pump Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on similar high-pressure fuel pump applications.
4

Fuel Pressure Regulator Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the regulator is properly seated before tightening.

Fuel Storage System

1

Fuel Pump Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar fuel pump applications.
2

Fuel Tank Strap Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar fuel tank strap applications.
3

Fuel Filler Neck Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar fuel filler neck applications.
4

Fuel Tank Sender Unit Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar fuel sender unit applications.

Fuel Filtration System

1

Fuel Filter Bolt/Nut

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar fuel filter applications.

Fuel Lines

1

Fuel Line Fittings

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar fuel line fitting applications.
2

Fuel Return Line Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar fuel return line applications.

Hvac

Torque specifications for Hvac

A/C Compressor Mounting

1

A/C Compressor Mounting Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated values, actual values may vary by model. Consult vehicle's service manual for specific torque values.

A/C Line Fittings

1

A/C Line Fittings

M12 x 1.75
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated values, actual values may vary by model. Consult vehicle's service manual for specific torque values.

Evaporator Core Mounting

1

Evaporator Core Mounting Bolts

M8 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Recommended torque values based on general industry standards.

Condenser Mounting

1

Condenser Mounting Bolts

M10 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Recommended torque values based on general industry standards.

HVAC Control Module Mounting

1

HVAC Control Module Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Recommended torque values based on general industry standards.

Heater Core Hose Clamp

1

Heater Core Hose Clamp Bolts

M8 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Recommended torque values based on general industry standards.

Suspension

Torque specifications for Suspension

Upper Suspension Components

1

Upper Control Arm Bushing Bolts

M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on industry standards for similar applications.
2

Steering Knuckle Bolts

M14 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated value based on industry standards for similar applications.
3

Coil Spring Insulator Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on industry standards for similar applications.

Lower Suspension Components

1

Lower Control Arm Bolts

M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Estimated value based on industry standards for similar applications.

Steering Components

1

Tie Rod End Nut

M16 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Estimated value based on industry standards for similar applications.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the recommended torque for the cylinder head bolts on a 2015 Volkswagen Golf?

The cylinder head bolts should be torqued to 100 Nm (74 lb-ft) in three stages: 60 Nm (44 lb-ft), 80 Nm (59 lb-ft), and then 100 Nm (74 lb-ft).

Q2

Can I use a torque wrench from another vehicle make on my 2019 Volkswagen Golf?

While most torque wrenches are compatible with different vehicle makes, it's always best to refer to the manufacturer's specifications. Check your VW Golf's service manual or consult a qualified mechanic for recommended torque wrench specifications.

Q3

How often should I check the torque on the lug nuts of my 2013 Volkswagen Golf?

Lug nut torque should be checked every 6,000 miles or 10,000 kilometers, and after any tire rotation or repair.

Q4

IS it safe to use an impact wrench to tighten bolts on my 2019 Volkswagen Golf?

Impact wrenches should be used with caution, as overtightening can damage bolts and components. If an impact wrench IS used, it's important to follow the manufacturer's recommended torque settings and use a torque stick or other device to prevent overtightening.

Q5

What IS the torque specification for the oil drain plug on a 2017 Volkswagen Golf?

The oil drain plug should be torqued to 30 Nm (22 lb-ft).

Q6

Can I over-torque bolts on my 2013 Volkswagen Golf and what are the potential consequences?

Yes, over-torquing bolts can stretch or break them, leading to component failure. It's crucial to use a torque wrench and adhere to the specified torque values to avoid such issues.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the golf.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures

Bolt Torque Specifications for 2013-2019 Volkswagen Golf

Comprehensive procedure for tightening bolts to proper torque specifications on the golf.

  • Locate the bolt you need to tighten.
  • Refer to the torque specifications table below for the correct torque value.
  • Use a digital torque wrench to tighten the bolt to the specified torque.
  • Tighten the bolt in a star pattern to ensure even tightening.
  • Double-check the tightness of the bolt using a torque wrench.
View full procedure
Technical Service Bulletins

TSB 20-01-06: Engine Mount Bolt Torque Specifications

2020-03-01

This bulletin provides updated torque specifications for the engine mount bolts on 2013-2019 golf models.

2013-2019 golf

Resolution: Replace the old bolts with new bolts torqued to the specifications in the bulletin.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Volkswagen Specs. All rights reserved.

Privacy Policy Terms of Service